hengyuwooden.com  ：

For some years now, wood has received an increasing amount of attention in the construction industry. With concerns raised about sustainability and the carbon footprint of buildings, new construction methods and innovative possibilities in the use of timber have developed rapidly. This interest in wood stems in part from its renewability, though this benefit is contingent on sustainable logging and the appropriate management of forests to be allowed to regenerate naturally. However, it is the versatility of wood that serves as the primary impetus for its widespread use. From boards, to beams, to floors, and even to thermal and acoustic tiles and insulators, wood can be used in several different stages of a single project and with different degrees of processing and finishing.

These boards have various of usages, for example they can be used as construction wood board, furniture wood board and decoration wood board. They can even be used for fitness, fitness equipment and wooden crafts.

In the case of the manufacture of furniture, wall coverings, ceilings, and even floors, the use of boards is an economical and functional way of incorporating wood into buildings. There are several options for wooden boards on the market, and each uses a different manufacturing process involving fibers, particles, fragments, or sheets, resulting in specific uses. Next, we select the most commonly used wooden boards, including their characteristics and main uses:

MDF (Medium Density Fiberboard)

MDF boards are made of wood fibers bonded by synthetic resin and compressed through pressure and heat, resulting in a solid and very uniform board with good finish and durability. Because the fibers are randomly oriented, the machine can cut them in any direction, delivering a smooth surface to the touch. Naturally, the board does not resist water well, but there do exist options on the market that are more resistant to moisture and sometimes even fire.

Chipboard and MDP (Medium Density Particleboard)

Chipboard is created by pressing wood debris, such as sawdust and dust, with resin and glue. Over time, this material has given way to other solutions such as the MDF or its nearest replacement, the MDP. It can be finished with paints and varnishes, but they rarely stick, since the surface is not smooth or uniform. The main advantage of this agglomerate is its low cost. Its uses are similar to MDF, but specific types of hardware and connections must be used to obtain a satisfactory result. The resulting panels are widely used in the production of simple furniture.

Plywood

Plywood boards are made of overlapping wood sheets glued perpendicularly and heat pressed. Just as with cross laminated timber (CLT), cross-directional fibers in plywood allow the board to withstand greater stress. Plywood's use is quite varied. It can be used for furniture, floors, ceilings, doors, and countertops among others. It is also compatible with paints and glues of natural sheets or melamine.

And there are still many other types of wood boards like solid wood board, paulownia wood board, poplar wood board, etc.