The key to avoiding rust and stains on auto electroplating air outlets lies in reducing the appearance of mold and rot microorganisms, and reducing their chances of contacting the product as much as possible; and during their effective attachment and in places, implementing sterilization treatment to eliminate the conditions for the survival of mold and microorganisms as much as possible. Usually auto electroplating air outlet surface "rust", is due to other air pollutants attached to the surface, not really rust, many pollutants can not be well cleaned with water.

So, how to deal with auto electroplating air outlet rust? Let's learn more about it.

Auto Electroplating Air Outlet Rust Treatment

When the auto electroplating air outlet rust is rusty, you can use a little toothpaste, apply it to the rusty spot, and then wipe the surface of the auto electroplating air outlet rust with a clean rag. Or use a cloth with a little weak acid to wipe the surface of the auto electroplating air outlet rust, and then wipe it again with a clean, fine rag, and the rust will be gone.

Anti-Rusting Method For Auto Electroplating Air Outlet

(1) Do not install the auto electroplating air outlet in a wet location, and do not use a wet rag to wipe the auto electroplating air outlet, otherwise, the plating and paint will easily fall off and rust.

(2) When the surface layer of the auto electroplating air outlet has yellow-brown mesh spots, it is recommended to use neutral oil for wiping to avoid the mesh spots from expanding all the time and making the plating protection layer flake off and rust.

(3) For auto electroplating air outlets with rust spots, you must remove the rust immediately, but never rub it with sandpaper. You can put it into a container with oil and soak it overnight, or you can use a brush or rag to dab the oil on the rust spot and wipe it back and forth a few times to eliminate the rust.

(4) Daily application of rust inhibitor on auto electroplating air outlet can achieve the effect of rust prevention.

The above is the related content about how to deal with auto electroplating air outlet rust, I hope it can bring help to you.