How many square feet can a wireless access point cover? The answer to this question depends on the type of wireless access point used and the environment used. Generally speaking, a "standard" access point can cover 1500 square feet and be used in an open environment, such as an open office or classroom.

However, when used in an environment with obstacles or interference, such as a crowded shopping center or office building, the coverage area will be greatly reduced. Using multiple access points can help reduce the limitation of coverage area.

By using multiple access points, you can create a much larger "package" access point. This can increase the area to 5000 square feet or more.

In addition, some newer access points are designed to provide technologies such as mesh networks, which can greatly increase the coverage area.

Should I install the access point on the wall or ceiling?

Installing an access point on the wall or ceiling depends largely on your specific situation. If you live in a place with heavy traffic, you'd better install the access point at a high place, such as the ceiling.

This will help ensure that the access point is not knocked or disturbed.

However, if the area is mostly empty and the access point needs to keep a certain distance from other things to work properly, it may be a better choice to install it on the wall. This will make it easier and more accurate to locate the access point for optimal performance.

In many cases, you can install the access point on the wall or ceiling to obtain the desired results. When deciding which installation location is most suitable for your specific setting, consider factors such as crowd interference, precise positioning and aesthetics.

What are the disadvantages of access points?

The main disadvantage of using access points is their limited coverage. Since it is broadcast from a single location, if there is an obstacle between the access point and other devices trying to connect, the signal may be blocked or weakened.

Another disadvantage is that the access point will be limited to a single protocol. If your needs change and you need to use a different protocol, you need to replace the access point with a new access point that supports the new protocol.

Access points are also relatively expensive because they have many hardware components and are difficult to set up and maintain. Most importantly, multiple access points will require additional settings because they need to be synchronized to interact with each other.

Finally, if you use an access point to cover a large area, the security level required to shut out unauthorized users may be very high. All these factors make the access point less attractive to some users.