It doesn't have to be difficult to execute Brother printer wifi setup. You can quickly connect your printer wirelessly by following a few simple instructions. Here's how to easily set up your Brother printer's WiFi:

1. Turn on your printer.

You should make sure your Brother printer is turned on and plugged in. Before continuing, wait for it to fully boot up.

2. Go to the Control Panel

Press the Menu or Settings button after navigating to the printer's control panel. To get to the Network settings, use the arrow keys.

3. Select the WiFi Configuration Wizard

Choose WLAN from the Network options, and then Setup Wizard. The printer will start looking for wireless networks that are available.

4. Pick Your Network

Select your WiFi SSID (network name) from the list of networks. You might have to manually input your network if it is hidden.

5. Type in the password

Use the keypad on the printer to enter the WiFi password. To ensure accuracy, proceed gently since this could take a long period.

6. Verification and Association

Verify the settings after entering the password. The printer will try to establish a network connection. You will see a confirmation message if it is successful. To confirm connection information, you can also print a network configuration page.

Use the Brother iPrintScan App as an alternative.

• The Brother iPrintScan software makes it easier to set up WiFi from your PC or phone, if your printer model supports it.

Advice:

• Since many Brother models do not support 5GHz, make sure your router is broadcasting at 2.4GHz.
• If connection problems continue, update the printer's firmware.
• Your Brother printer should be successfully linked to WiFi after completing these steps, enabling wireless printing from any device.

For further details visit our website.