It doesn't have to be difficult to execute Brother printer wifi setup. You can quickly connect your printer wirelessly by following a few simple instructions. Here's how to easily set up your Brother printer's WiFi:
- Turn on your printer.
You should make sure your Brother printer is turned on and plugged in. Before continuing, wait for it to fully boot up.
- Go to the Control Panel
Press the Menu or Settings button after navigating to the printer's control panel. To get to the Network settings, use the arrow keys.
- Select the WiFi Configuration Wizard
Choose WLAN from the Network options, and then Setup Wizard. The printer will start looking for wireless networks that are available.
- Pick Your Network
Select your WiFi SSID (network name) from the list of networks. You might have to manually input your network if it is hidden.
- Type in the password
Use the keypad on the printer to enter the WiFi password. To ensure accuracy, proceed gently since this could take a long period.
- Verification and Association
Verify the settings after entering the password. The printer will try to establish a network connection. You will see a confirmation message if it is successful. To confirm connection information, you can also print a network configuration page.
Use the Brother iPrintScan App as an alternative.
- The Brother iPrintScan software makes it easier to set up WiFi from your PC or phone, if your printer model supports it.
Advice:
- Since many Brother models do not support 5GHz, make sure your router is broadcasting at 2.4GHz.
- If connection problems continue, update the printer's firmware.
- Your Brother printer should be successfully linked to WiFi after completing these steps, enabling wireless printing from any device.
For further details visit our website.
